|
|
|
|  
We are open Tuesday through Friday, 9:00 AM to 6:00 PM and on Saturday 9:00 AM to 5:00 PM, The Service Center is now closed at 5:00 PM for the season. Due to popular demand, we now carry Schwinn Scooters, from 49cc to 150cc's. Come check 'em out TODAY! 
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed
- Stock base circle sizes allow the use of stock pushrods
- V2 and N2 are bolt-in cams for stock applications designed for up to 6000 rpm
- N3 cam is bolt-in for 05-06 883/1200 engines with stock springs & heads (cams for 04-06 models with more than .465 lift may need different valves, springs and collars)
- V4 and N4 are for stock or modified applications and have a slightly higher idle speed, but can be used with stock hydraulic lifters and springs; rpm range of 2500-6500
- V6 and N6 designed for modified 1200s to 80” and/or high compression pistons: stock springs and hydraulic lifters recommended; rpm range 2500-6500
- V8 and N8 designed for modified 883, 1100 and 1200 stroker models; stock springs and hydraulic lifters recommended; rpm range 2000-6000
- N6 designed for modified 1200s to 80” and/or high compression pistons: stock springs and hydraulic lifters recommended; rpm range 2500-6500
- N8 designed for modified 883, 1100 and 1200 stroker models; stock springs and hydraulic lifters recommended; rpm range 2000-6000
- B50 designed for more valve lift and duration; stock hydraulics and springs; more power and torque 2000 to 6000 rpm
- B70 designed for high lift in modified motors; works best with high compression; more torque and HP 2400 to 6500+ rpm
“Y” CAMS- Biggest available cam that does not require head work; however, some 82 engines may require spring spacing
- Cam uses stock springs and provides great mid-range and upper-end power
- Tach drive gear must be removed from #4 cam on 81-E84 models.
“R5” CAMS- A complete set of intake and exhaust cams designed for modified 1000cc engines and mild strokers for the street or the strip
- A big boost in torque over stock P cams through entire rpm range, up to 7500
- Can use stock springs, but spacing is required
- Cam lobe clearance must be checked on 77 and later models; tach drive gear must be removed from #4 cam on 81-E84 models.
“PB+” EXHAUST CAMS- ”PB+” exhaust cams only (#s 1 and 4)
- Use with stock P intake cams for bolt-in power with stock 1000cc engines; stock springs are okay and no head work is required
- Come with tach gear pressed on; however, must remove tach gear from #4 cam on 81-E84 models.
B50 GRIND CAM SET- More valve lift and duration
- Works with stock hydraulics and springs
- More power and torque 2000 to 6000 rpm
B70 GRIND CAM SET- High lift cam for modified motors
- Works best with high compression
- More torque and HP 2400 to 6500+ rpm
|
|
|
|
|
|
|
|
|
Join our
E-Newsletter
Click HERE to visit
our eBay store!
| |
|
|
|
|
